Single-Ram Power Tilt Systems
INSTALLATION INSTRUCTIONS FOR SINGLE-RAM POWER TILT SYSTEMS
![](https://cdn.shopify.com/s/files/1/0465/3819/5097/files/m-ywedge_universal_1bb31a16-a8e4-4f9f-9e5c-96bcc4991bd1_240x240.png?v=1599943803)
![](https://cdn.shopify.com/s/files/1/0465/3819/5097/files/universal_merc_8f14d0e7-80b3-415c-8be4-a8eb0c6907ce_480x480.jpg?v=1600043541)
- Trim outboard to up position.
- Simply push the Universal m-y wedge on the power-tilt rod and it will pop or click into place.
- Trim outboard down until the rubber begins to compress.
- To remove Universal m-y wedge simply trim outboard to up position and remove.
- Store Universal m-y wedge in any boat compartment for convenience.
NOTE: The Universal m-y wedge can be cut to size, if your outboard sits too high or you have problems with tilting your motor high enough to install the unit. Simply cut the Universal m-y wedge using a miter or hack saw. You normally don't need to cut off more than an inch.
WORKS ON:
- Mercury 15 to 200 hp 4-stroke with single-ram trim/tilt
- Yamaha (9 to 90 hp and new F115LB) with single-ram trim/tilt
- Honda with single-ram trim/tilt
- Suzuki with single-ram trim/tilt
- Evinrude with single-ram trim/tilt
- Johnson with single-ram trim/tilt
- Tohatsu with single-ram trim/tilt
- Kicker motors with power tilt systems.
Mercury Verado 6-cylinders use TWO Universal m-y wedge units.
![](https://cdn.shopify.com/s/files/1/0465/3819/5097/files/universal_verado_before_9f1d97c7-8290-45d5-8737-ccf4eef4c93d_240x240.jpg?v=1600043786)
![](https://cdn.shopify.com/s/files/1/0465/3819/5097/files/universal_verado_raised_d5bb471b-80b1-4400-a517-e01f4746dbf3_240x240.jpg?v=1600043827)
![](https://cdn.shopify.com/s/files/1/0465/3819/5097/files/universal_verado_lowered_9ca4c961-906f-43e2-936e-0f6981ca3150_240x240.jpg?v=1600043856)